![[Translate to Italian:] E-Kit Installation](/fileadmin/_processed_/b/e/csm_E-Kit-Installation_79b4bd77b8.jpg)
- How can I recognise an Erich Jaeger product?
- How to interpret the symbols from the installation instructions?
- Is it possible for me as a private customer to buy directly from ERICH JAEGER?
- What can I do if the control unit on my wiring harness hums?
- What is the contact allocation of my control module?
- Where can I find the product number or software version of the control module?
- Where can I find the software version of the JaegerCANtrol control module without taking it apart?
- A C2 control light was not included with my wiring harness?
- Can I switch off my parking sensors when I attach a trailer?
- Diagnosis on the CAN-Bus with JaegerCANtrolLED: 381977, 383077, 381978, 383078, 381979, 383079 without diagnosis LED.
- How can I recognise an Erich Jaeger product?
- How to interpret the symbols from the installation instructions?
- If a test unit or diagnosis unit for coding is available in the workshop, can this be used?
- Mechanical disabling contact / fog light disabling (2a / 58b)
- Trailer control module JaegerCANtrolLED with diagnosis LED
- What are the advantages of a 13-pin wiring harness?
- What are the advantages of CAN-Bus technology?
- What can I do if the control unit on my wiring harness hums?
- What does the term „JaegerCANtrolLED“ mean?
- What information should I have ready when I call or email ekit-support?
- What is an electrical preliminary setup or preparation?
- What is a specific wiring harness?
- What is a universal wiring harness?
- What is a “JaegerFLEX 2in1” wiring harness?
- What is SVM coding (measure code) or license coding?
- What is the difference between a 7-pin and 13-pin wiring harness?
- What is the difference between a universal and a specific wiring harness?
- What is the extra switch (micro-switch) in the socket for?
- What is “Check Control”?
- Where can I find the cable harness number or how can I identify a cable harness without any other documentation?
- Where can I find the product number or software version of the control module?
- Where can I find the software version of the JaegerCANtrol control module without taking it apart?
- Where can I find the wiring harness’ product number?
- Where can I get replacement parts?
- Why does the power supply have to be directly from the battery (permanent positive clamp 30)? Can a different power source be used?
- Why do I have to fit an additional cable to just one side indicator, even though the indicators on the trailer already work via the CAN bus leads?
- Why do I have to fit an additional cable to the brake lights, even though the lights on the trailer already work via the CAN bus leads?
- Why do several fault lights in the instrument panel light up after installation of a wiring harness?
- Why do the control lights flash simultaneously on the test unit for trailer sockets?
- Why do the installation instructions say that the wiring harness must be approved or encoded?
- Why is a 12-volt power supply to the trailer control module needed?
- Why is the trailer socket not working , even though everything is connected as per the installation manual?
- A C2 control light was not included with my wiring harness?
- Can I switch off my parking sensors when I attach a trailer?
- Diagnosis on the CAN-Bus with JaegerCANtrolLED: 381977, 383077, 381978, 383078, 381979, 383079 without diagnosis LED.
- How can I recognise an Erich Jaeger product?
- How to interpret the symbols from the installation instructions?
- If a test unit or diagnosis unit for coding is available in the workshop, can this be used?
- Mechanical disabling contact / fog light disabling (2a / 58b)
- Trailer control module JaegerCANtrolLED with diagnosis LED
- What are the advantages of a 13-pin wiring harness?
- What are the advantages of CAN-Bus technology?
- What can I do if the control unit on my wiring harness hums?
- What does the term „JaegerCANtrolLED“ mean?
- What information should I have ready when I call or email ekit-support?
- What is an electrical preliminary setup or preparation?
- What is a specific wiring harness?
- What is a universal wiring harness?
- What is a “JaegerFLEX 2in1” wiring harness?
- What is SVM coding (measure code) or license coding?
- What is the difference between a 7-pin and 13-pin wiring harness?
- What is the difference between a universal and a specific wiring harness?
- What is the extra switch (micro-switch) in the socket for?
- What is “Check Control”?
- Where can I find the cable harness number or how can I identify a cable harness without any other documentation?
- Where can I find the product number or software version of the control module?
- Where can I find the software version of the JaegerCANtrol control module without taking it apart?
- Where can I find the wiring harness’ product number?
- Where can I get replacement parts?
- Why does the power supply have to be directly from the battery (permanent positive clamp 30)? Can a different power source be used?
- Why do I have to fit an additional cable to just one side indicator, even though the indicators on the trailer already work via the CAN bus leads?
- Why do I have to fit an additional cable to the brake lights, even though the lights on the trailer already work via the CAN bus leads?
- Why do several fault lights in the instrument panel light up after installation of a wiring harness?
- Why do the control lights flash simultaneously on the test unit for trailer sockets?
- Why do the installation instructions say that the wiring harness must be approved or encoded?
- Why is a 12-volt power supply to the trailer control module needed?
- Why is the trailer socket not working , even though everything is connected as per the installation manual?